松尼克PowerSonic蓄电池PS-1270/12V7AH 20HR参数表
| 型号 | 标称电压（V） | 额定容量(20hr) | 放电电流 (20hr) | 长度 | 宽度 | 高度 | 总高 | 重量 | 端子类型标准 | |||||
| V | 20hr | mA | inch | mm | inch | mm | inch | mm | inch | mm | lbs | kgs | ||
| PS-1270 | 12 | 7.0 | 350 | 5.95 | 151 | 2.56 | 65 | 3.70 | 94 | 3.86 | 98 | 4.80 | 2.18 | F1/F2 |
松尼克電源有限公司Power-sonic Correration Limited自1993年起陆续与法国工研院材料所合作深度放电用密闭式电池、电动机车用电池及高功率改质电池等之开发，并多方引入新技术，更投资了许多优秀的设备来彰显我们对客户与时俱进；永续发展的信念与承诺。涵盖了全球企业的各个方面的业务，无论你的需求是什么样的电池，我们将呈现更完美的电池产品。
法国松尼克蓄电池powersonic电池 POWER SONIC蓄电池 power-sonic电源 松尼克电瓶
CHARGING
Cycle Applications: Apply constant voltage charge at
2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C.
Initial charging current should be set at less than 0.25C
Amps. Switch to fl oat charge to avoid overcharging.
“Float” or “Stand-By” Service: Apply constant voltage
charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v
Monobloc at 20°C. When held at this voltage, the battery
will seek its own current level and maintain itself in a fully
charged condition.
Temperature Compensation: Charging Voltage for both
Cyclic and Standby applications should be regulated in
relation to ambient temperature. As temperature rises
charging voltage should be reduced to prevent overcharge
and increased as temperature falls to avoid undercharge.
For further charging information including temperature
compensation factors, see Power Sonic Technical Manual/
Power Sonic Charger specifi cations.
CHARGERS
Power Sonic offers a wide range of chargers suitable
for batteries with a variety of capacities.
Please refer to our website for more information on
our switch mode and transformer type chargers.
Please contact our technical department for advice if
you have diffi culty in locating a suitable charger.
FURTHER INFORMATION
Please refer to our website www.power-sonic.com
for a complete range of useful downloads, such as
product catalogs, material safety data sheets (MSDS),
ISO certifi cation, etc.
APPLICATIONS
• General purpose
• Emergency lighting
• Medical
• Fire and security