松尼克PowerSonic-PSL-SC系列锂电池具有以下特点：
- 串联连接能力：这意味着你可以将多个电池串联起来，以提高整体的电压和能量密度。这在一些需要高电压或长续航时间的应用中非常有用。
- 安全性能：可充电锂电池通常使用高安全性的材料，如磷酸铁锂（LiFePO4），这种材料可以减少因高冲击、过充或短路等情况导致的爆炸或燃烧风险。
- 电池管理系统（BMS）：这些电池可能配备有电池管理系统（BMS），用于控制电池的充电、放电和保护，以确保电池的安全和稳定运行。
- 需要注意的是，虽然可充电锂电池具有许多优点，但在使用时也需要注意一些事项，如避免过充、过放和短路等情况，以确保电池的安全和延长使用寿命。
超安全磷酸铁锂（LiFePO4）化学
降低由于高
充电过度或短路情况
蓄电池管理系统（BMS）控制
通过以下方式提供最佳安全性的电池参数
防止过充电和过放电
BMS增强的设计平衡了电池单元，
优化电池性能
通过并联或
串行连接
•即使在
高放电率，同时保持恒定功率
更快的充电和更低的自放电
循环次数是铅酸电池的10倍
紧凑，重量仅为同类铅的40%
酸性电池
•坚固耐用的抗冲击ABS外壳
批准
UL 1642电池证书
IEC 62133电池证书
•UN 38.3认证
ISO9001:2015-质量管理体系
Nominal Voltage
12.8 V
Rated Capacity
7.2 AH at a Constant Current of 0.2C to 10V
Stored Energy
92 Wh
Cycle Life (@DOD100%)
2000 Cycles
Approximate Weight
2.0 lbs (0.9 kg)
Internal Resistance
≤90.0 mΩ
Max Charge Current
7.2 A
Max Discharge Current
15 A
Charge Cut-off Voltage
14.6 V
Recommended Discharge Cut
Off Voltage
11 V
Series & Parallel Connection
6 in series or 4 in parallel
Operating Temperature Range
Charge
Discharge
Recommended
32°F (0°C) to 113°F (45°C)
-4°F (-20°C) to 140°F (60°C)
59°F (15°C) to 95°F (35°C)
Self-Discharge Rate
≤3%/month
Long Term Storage
Charge every 6 months or as soon as
OCV is 12.8V
Power Sonic Chargers
Contact us for information on a suitable
charger.
Life Expectancy (years)
5 years at one cycle per day
Short Circuit Protection
Automatically recover after removal of
short
Dimensional Tolerances
+/- 0.04 in. (+/- 1mm) for length and width
+/- 0.08 in. (+/- 2mm) for height dimensions
Terminal Type
F2
INTELLIGENT BATTERY MANAGEMENT SYSTEM
The PSL-SC Series comes with an intelligent battery
management system which monitors current and voltages
during charge and discharge. This protects the battery
from over-charge and over-discharge.
The BMS embeds smart balancing algorithms that control
all cell voltages in the battery, making sure they are
constantly at the same voltage level, optimizing battery
capacity.
SERIAL CONNECTION CAPABLE
The SC series allows for up to 6 batteries connected in
series or 4 in parallel, but not concurrently. The batteries
must all be matched at voltage levels, capacity, state of
charge, date of manufacturing, and chemistry.
APPLICATIONS
• Medical
• Solar
• Wind
• Mobility
• Data Center
• Transport
• Sports &
Recreation
• Utility